Set up AOMG IP camera for external monitoring
Spanish version / Versión en Español This setup was done with a specific IP camera: AOMG OG-IPC3J19P-I3(A), but it can easily be extended for any other similar IP camera. This particular one has a wired Ethernet interface, so it requires a physical ethernet cable to the router. Physical connection We're going for this kind of setup: So, we need to connect the camera to a power outlet using its provided power adapter, and to the router via an Ethernet cable. Make sure it's CAT5 or better if it will be outdoors (this camera model is suited for outdoor use, so don't worry about that). To check that the camera has power, cover its lens with your hand and check if its red leds light up. It has no on/off switch, so that's the only wall to tell if it is on. Local configuration The first step is getting the camera's IP address ; this is usually specified in the manual, but in case you misplaced it, or a power failure reset the camera's settings, t